PCI offers a patented laser ablatable film for newer infra-red laser plate imagers with a vacuum system. It offers substantial cost savings in that you no longer need an image setter, just a laser (a $25,000 -$100,000 savings on equipment, not to mention ongoing maintenance and precious metal films), further the process is chemical free. Since the product is competitively priced, the consumer saves on both chemical purchases and waste removal costs. It requires absolutely no processing. The product also has no known shelf life limits.
3ES-PROIII-EDLFi
Capable of exposing, drying and finishing & post-exposing all high-quality photopolymer plates at high dot resolution, excellent line definition, deep reverses repeatable results for both back and main exposures to meet the highest HD Flexo standard
• High power UV-A lamps for high quality at high speed
• New design for lamp temperature control and regulation
• Easy to operate, install and maintain
• 7” Touch screen easily customize and setup for 20 different programs
Exposure
• Cool bed with accurate temperature cooling unit
• Suitable for all digital and analog plates
• Lamp working hour calculator
• Defective lamp indicator
• Clamshell design lid with automatic opening-closing
• Yellow inspection tube
Drying
• Programmable drying temperature accordign to plate type
• 3 drawer
• Timer for each drawer
• Easy accessible wide opening drawers for easy operating and high productivity
• Uniform temperature distribution for excellent drying and plate dimensional stability
• Automatic switch off after the last plate
Light Finishing & Post Expose
• UV-A and UV-C lamps
• Defective lamp indicator
• Fume extraction system
• Lamp working hour calculator
• New design for lamp temperature control and regulation
• Sequential/simultaneously/separately operating option for Light Finisher and Post Exposure
• CE certificate
3ES-PROIII-WF is designed as inline photopolymer flexo printing plate washing, rinsing and drying equipment and suitable for processing high-quality plates, it is the first and only successful inline plate processor for water wash flexo plates in the market.
• The processor is equipped with a state-of-art filter which offers ecologically friendly and cost-effective working. The state-of-art filter removes polymer residue in washing solution and the clean washing solution is recirculated to washout tank for reuse.
• User-friendly 7" Graphic Touch Screen
• PLC controller with remote technical support by network connection
• 20 channels program memory for different plates of process conditions
• Easy to operate and maintain
• Capable of processing both analog and digital plates
• Pre-wash for LAMS-layer, washing, rinsing, and pre-dryer
• Reliable washing, high quality, and high productivity
• Automatic water and detergent replenishment
• Stainless steel washout body and external tank facility, robust, easy to support and maintain
• Automatic thickness control between 0,6 mm to 7 mm
• Back-side plate cleaning
• Integrated heater and temperature control up to 50°C
• CE certificate
EasyTrans M
Photopolymer plate loading and transporting table with automatic height adjustable
* 3 programmable height channels
* Manually height adjusting push button between 73 cm to 139 cm
* Manually tilt to both direction
* Built-in, high-performance lithium-ion battery with a capacity of 2.2 Ah
Available in 1067x1532 mm / 920x1200mm / 635x762mm/ 500x700mm/350x500mm
3ES-PROIV-ETLDi
Plate exposing equipment for photopolymer plates up to a maximum size of 1320 x 2032 mm.
Capable of exposing (back & main), all high quality photopolymer plates at high dot resolution, excellent line definition,deep reverses repeatable results for both back and main exposures to meet the highest HD Flexo standard
• High power UV-A lamps for high quality at high speed
• Easy to operate, install and maintain
• User-friendly 7” touch screen operation panel displays all necessary times and settings
• 20 programmable channels for different plates process conditions
• The top lid opens/closes smoothly and completely, it makes easier to reach all four sides of the plate.
• Provides both main and back exposure at once without moving plate due to the glass bed
• Suitable for all digital and analogue plates
• Lamp life time calculator
• Defective lamp indicator
• Lamp temperature control and regulation
• Temperature controlled back exposure apply
• Yellow inspection lamp
• Electronic ballast
• End of job alert.
3ES-PROIV-ETLCi
• Capable of exposing and finishing & post-exposing* all high-quality photopolymer plates at high dot resolution, excellent line definition, deep reverse repeatable results for both back and main exposures to meet the highest HD Flexo standard
• High power UV-A lamps for high quality at high speed
• New design for lamp temperature control and regulation
• Easy to operate, install and maintain
• User-friendly 7” touch screen operation panel displays all necessary times and settings
• 20 programmable channels for different plates process conditions
• Cool bed with accurate temperature cooling unit
• The top lid opens/closes smoothly and completely, easy access to all four sides of the plate.
• Suitable for all digital and analog plates
• Lamp working hour calculator
• Defective lamp indicator
• Lamp temperature control and regulation with cooling fan
• Yellow inspection lamp
• Electronic ballast
• End of job alert
• One drawer for stock/Light Finisher & Post Expose*
• With punch option
• CE certificate
*Optional
EXCELSOLV 5280 is designed as inline high productivity photopolymer plate washing, rinsing and pre-drying equipment, suitable for processing high-quality plates
• User-friendly 7" touch screen
• 20 channels program memory for different plates process conditions
• Capable of processing both analogue and digital plates
• Pre-wash for LAMS-layer, washing, rinsing and pre-drying
• Plate transport by pin bar, drive by chain
• Reliable washing, high quality and high productivity
• Back-side plate cleaning
• Automatic thickness control between 0,6 mm to 7 mm
• Automatic solvent replenishment
• Continuous solvent fume exhaust system
• Stainless steel washout body and external tank facility, robust, easy to support and maintain
• Integrated heater-chiller for solvent temperature control between 20°C to 40°C
• Automatic solvent viscosity measurement and fresh solvent replenishment
• CE certificate
3ES-PROIV-D
The device is designed for drying photopolymer plates up to a format size of 1320x2032 mm.
• 7” touch panel
• Easy designed operation panel displays all necessary times and settings
• 20 programmable channels for different plates process conditions
• End of job alert.
• Easy accessible wide opening drawers for easy operating and high productivity
• Uniform temperature distribution for excellent drying and plate dimensional stability
• High heat output for quick optimal temperature
• Digital timer and countdown facility for each drawer
• Maximum isolation for heat loss
• Magnetic sealed drawers
• Automatic switch off after the last plate
• Programmable drying temperature up to 60˚ C with thermostat control
• CE certificate
*Light Finisher is an option
3ES-PROIV-LF
The device is designed for finishing and post-exposing photopolymer plates up to a format size of 1320 x 2032 mm.
- 4.3” touch screen control panel
- 20 memory programs for different plates process conditions
- Sequential/simultaneously/separately operating option for Light Finisher and Post Exposure
- End of job alert
- Lamp life time calculator
- Lamp temperature control and regulation
- Integrated exhaust system
CE certificate
EasyTrans L
Photopolymer plate loading and transporting table with automatic height adjustable
* 3 programmable height channels
* Manually height adjusting push button between 73 cm to 139 cm
* Manually tilt to both direction
* Built-in, high-performance lithium-ion battery with a capacity of 2.2 Ah
Plate Format up to: 1320 x2032 mm
Maximum Plate Load: 1320x2032 mm
Maximum Height/Tilted Height: 138,5/200 cm
Minimum Height/Tilted Height: 73,4/145 cm
Power Supply: 220 V AC 50/60 Hz.
Dimension: 1400x2092x734 mm
Crate Size: 1500x2200x884 mm
3ES-PROII-FPK is designed as inline high productivity photopolymer letterpress plate washing, rinsing, drying and post-exposing equipment, suitable for processing high-quality plates
• Simple operation by 7" graphic touch screen with programmable 20 different channels
• PLC controller
• Easy to operate and maintain
• Capable of processing both analog and digital plates
• Pre-wash for LAMS-layer, washing, rinsing, drying and Post-exposing
• Stabile plate transport by pin bar
• Reliable washing, high quality, and high productivity
• Direct water supply (hot water is required if only cold water is available) or
• integrated tank for main wash and pre-wash
• The thickness of plate 0,6 mm to 7 mm
• Back-side plate cleaning
• Integrated heater and temperature control up to 45°C
• Programmable drying temperature up to 45°C
• Stainless steel washout body and external tank facility, robust, easy to support and maintain
• Includes a self-adhesive carrier board for foil-based plates and magnetic carrier board for steel based plates
• CE certificate
3ES-COMBI-FPK50
All-in-one system, Exposure, Washout, and Dryer up to a format size of 500 x 700 mm.
- LCD Control Panel, easily customize and setup for 9 different programs
Washout
- Equipped with a flat brush, rotating plate board and temperature control up to 60°C
- Excellent permanent self-adhesive sticky plate board for foil-based plates and Magnetic plate board for metal-based plates
- Plate thickness adjustment
Exposure
- UVA exposing lamps
- Powerful and fast vacuum system and vacuum indicator on the control panel
- Defective lamp indicator
- Lamp temperature control and regulation
- End of job alert
Drying
- Two drying drawer
- Timer for each drawer
- Uniform temperature distribution for excellent drying and plate dimensional stability
- Programmable drying temperature up to 60°C
3ES-COMBI-FPK50s
All-in-one system, Exposure, Washout, and Dryer up to a format size of 500 x 700 mm.
- Stainless steel body, 7" Touch screen panel, easily customize and setup for 20 different programs
- End of job alert
Washout
- Equipped with flat brush, rotating plate board and temperature control up to 50°C
- Excellent permanent self-adhesive sticky plate board for foil based plates and Magnetic plate board for metal based plates
- Automatic plate thickness adjustment
- Automatic lid opening/closing
Exposure
- UVA exposing lamps
- Powerful and fast vacuum system and vacuum indicator on control panel
- Defective lamp indicator
- Lamp temperature control and regulation
Post Exposure
- UVA exposing lamps
Drying
- Two drying drawer
- Timer for each drawer
- Uniform temperature distribution for excellent drying and plate dimensional stability
- Programmable drying temperature up to 60°C
3ES-COMBI-FPK35
All-in-one system, Exposure, Washout, and Dryer up to a format size of 350 x 500 mm.
- LCD Control Panel, easily customize and setup for 9 different programs
Washout
- Equipped with the flat brush, rotating plate board and temperature control up to°C
- Excellent permanent self-adhesive sticky plate board for foil-based plates and Magnetic plate board for metal-based plates
- Plate thickness adjustment.
Exposure
- UVA exposing lamps
- Powerful and fast vacuum system and vacuum indicator on the control panel
- Defective lamp indicator
- Lamp temperature control and regulation
- End of job alert
Drying
- Two drying drawer
- Timer for each drawer
- Uniform temperature distribution for excellent drying and plate dimensional stability
- Programmable drying temperature between 15°C to 65°C (±2°C)
- End of job alert